Programme 2017

Introductory DaySymposium day oneSymposium day two

25 September 2017

BASICS AND PRACTICE OF AUTOMOTIVE TRANSMISSIONS, HYBRID & ELECTRIC DRIVES

Institut-of-Automotive

Schedule: 9.00 a. m. – 5.00 p. m.

Objective
Newcomers and beginners will get an overview of the basics of conventional, hybrid and electric drives during the Introductory Day. Based on road resistances and the characteristics of modern propulsion systems, the need for transmissions as torque and speed converting units will become obvious. In the session ‘design layouts’, different transmission concepts will be discussed. The last session will be focusing on drive train management and the resulting challenges regarding drivability and efficiency.

About the instructors
The Introductory Day will be held by the Institute of Automotive Engineering (IAE), Technical University Braunschweig, Germany. The IAE under the direction of Prof. Dr Ferit Küçükay has excellent experience in all relevant areas of automotive research and development. It is the leading institute in Germany for automotive transmission development and research. With its close contact to the automotive and supplier industry, technical service providers, inspection authorities and public research institutions as well as national and international interdisciplinary working methods, it is highly experienced in solving complex problems and ensuring up-to-date seminars. The IAE holds this Introductory Day regularly also as an integral part of the European CTI Symposium Berlin (Germany).

Content

Automotive drive concepts

  • Drive characteristics and driving resistances, basics of longitudinal dynamics
  • Background and function of starting devices, transmissions, hybrid and electric drives
  • Design and function of
    • conventional drive concepts
    • serial, parallel and power-split hybrid drives
    • electric drives
  • Market and development trends

Design layouts

  • Starting devices – clutch, dual-mass flywheel, torque converter
  • Transmission concepts (1):
    • Manual transmission (MT) – Two and multiple-shaft transmission for front-wheel and standard drive

Design layouts and drive train management

  • Transmission concepts (2):
    • Automated manual transmission (AMT) – “add on” and integrated solutions
    • Dual-clutch transmission (DCT): in production application, introduced prototypes
    • Automatic transmission (AT): different gear set arrangements, examples of application
    • Continuously variable transmission (CVT): layout, chains and belts, driveability
    • Dedicated hybrid transmission (DHT): principles, applications and new concepts
  • All-wheel drives

Drive train management

  • Drive train management and operating strategy
  • Control – shifting characteristics, applications
  • Interfaces – engine, body, chassis
5.00 p. m. – 7.00 p. m.

PRE-CHECK-IN FOR MAIN DAYS
Get your conference documents and avoid waiting lines on the next day

Main event: 26 September 2017

 PLENARY SPEECHES 
8.00

Reception and hand out of the conference documents
Opening of the Transmission Expo

8.30 – 8.45

Welcome address by the Chairman of the CTI Symposium

Prof. Dr Ferit KüçükayProf. Dr Ferit Küçükay
Managing Director, Institute of Automotive Engineering
Technical University of Braunschweig, Germany

Institut-of-Automotive

8.50 – 9.10

Roadmap of Geely G-Blue strategy

Zhengnan HUZhengnan HU
President
GEELY Automobile Research Institute, China

geely

9.10 – 9.30

First 7-Speed DCT developed and produced in China

Lipeng ZHENGLipeng ZHENG
Vice President and Project Director
Great Wall Motor Transmission Research Institute, China

wey-great_wall

9.30 – 9.50 Market needs for fuel-saving transmissions and hybrid technologies to cope with future regulations

Dr Harald MassmannDr Harald Massmann
Head of Region Asia-Pacific, Powertrain Technology
ZF (China) Investment Co. Ltd, China

zf

9.50 – 10.10

Q & A

10.10 – 11.00

Coffee break and visit to the Transmission Expo

11.00 – 12.00

 PANEL DISCUSSION 

Transmission and drive systems developed and produced in China

MODERATOR:
Prof. Dr Ferit Küçükay, Technical University of Braunschweig, Germany

PANELISTS:
Zhengnan HU, President, Geely Automobile Research Institute, China
Lipeng ZHENG, Vice President and Project Director, Great Wall Motor Transmission Research Institute, China
Dr Harald Massman, Head of Region Asia-Pacific, Powertrain Technology, ZF (China) Investment Co., Ltd, China
Michael Schöffmann, Head of Transmission Development, Audi AG, Germany

Parallel Sessions

Dedicated Hybrid Transmission (DHT)
Conventional Transmission
and Drive System Concepts
Conventional Transmission
and Drive System Components
Function Development,
Testing, Calibration
18.30 – 21.30

CTI Networking Night

Main event: 27 September 2017

 PLENARY SPEECHES 
8.00

Reception and opening of the Transmission Expo

8.30 – 8.40

Opening of the day by the Chairman of the CTI Symposium

Prof. Dr Ferit KüçükayProf. Dr Ferit Küçükay

8.40 – 9.00

Modular development for eDrive system

Dr Shemin ZHANG
Director of Powertrain Development,
Dongfeng Motor Technical Center, China

9.00 – 9.20

The advantages and application outlook of turbine-recharging electric vehicle

Pu JINPu JIN
President & CTO
Techrules Automobile R&D Co., Ltd

techrules

9.20 – 9.40

Energy supply for future vehicles and mobility

Michael Schöffmann
Head of Transmission Development
Audi AG, Germany

audi

9.40 – 10.00

Let us listen, think, and execute in China for Chinese automobile

Haruhisa Nakano
Vice President
Jatco (Guangzhou) Automatic Transmission Ltd, China

jatco

10.00 – 10.20

Q&A

10.20 – 11.05

Coffee break and visit to the Transmission Expo

Parallel Sessions

NEV Transmission and Drive System Concepts
NEV Transmission and Drive System Components
Transmission & Drive System Market, Development Requirements
Actuator, Sensor and Control Units in Drive System
5.15

Summary of the Symposium
Prof. Dr Ferit Küçükay